PSI-818 Series (800W-3000Wㄘ Pure Sine Wave High Frequency Inverter
General Features
Colorful LCD display
AC output voltage 220-240V / 110-120V settable via LCD panel, 230 default
Output frequency 50Hz/60Hz settable via LCD panel, 50Hz default
Normal mode and Boost mode settabel via LCD panel, Boost mode default
Wired remote control with 6m cable
Additional output terminal (available for 1800W/2000W/2800W/3000W)
Technical Specifications
MODEL | PSI-818-800W-12 | PSI-818-1200W-12 | PSI-818-1800W-12 | PSI-818-2800W-12 | PSI-818-1000W-24 | PSI-818-1500W-24 | PSI-818-2000W-24 | PSI-818-3000W-24 |
---|---|---|---|---|---|---|---|---|
Rated Power | 800W | 1200W | 1800W | 2800VA | 1000VA | 1500VA | 2000VA | 3000VA |
Batery Voltage | 12VDC | 24VDC | ||||||
DC INPUT | ||||||||
Battery Type | Lead acid / LiFePO4 | |||||||
Input Voltage Range |
9.5 - 15.5 VDC |
19.0 - 31.0 VDC | ||||||
Idle Current |
< 1A |
< 1.4A | < 1.7A | < 2.3A | < 1A | < 1.4A | < 1.7A | < 2.3 A |
AC OUTPUT | ||||||||
Output Voltage | 220V~ / 230V~, or 110V~ / 120V~ | |||||||
Output Frequency |
50 Hz / 60 Hz |
|||||||
Output Waveform |
Pure sine wave |
|||||||
Efficiency |
Max 90% |
|||||||
DISPLAY | ||||||||
D Display | Input voltage, output voltage, output frequency, battery capacity, load rate, error code | |||||||
Setting Keys |
Output voltage, output frequency, output mode(boost mode or normal mode) |
|||||||
BATTERY PROTECITONS | ||||||||
Battery Reverse Connection |
40A x 3 |
45A x 4 | 45A x 6 | 45A x 9 |
30A x 2 |
25A x 4 | 35A x 4 | 35A x 6 |
Battery Low Voltage Alarm |
When battery voltage <=10VDC, beeps slowly (once per 2 seconds). Error code :06 |
When battery voltage <=20VDC, beeps slowly (once per 2 seconds). Error code :06 |
||||||
Battery Low Voltage Alarm Recovery |
When battery voltage >= 11VDC |
When battery voltage >= 22VDC |
||||||
Battery Low Voltage Cut & Shutdown |
When battery voltage <=9.5VDC, output cuts off, and buzzer beeps rapidly (once per second). Error codeㄩ01. After 30s inverter shuts down automatically. |
When battery voltage <=19VDC, output cuts off, and buzzer beeps rapidly (once per second). Error codeㄩ01. After 30s inverter shuts down automatically. | ||||||
Battery Low Voltage Recovery |
When battery voltage >=12VDC |
When battery voltage >=24VDC |
||||||
Battery High Voltage Cut & Shutdown |
When battery voltage >=15.5Vdc, output cuts off, and buzzer beeps rapidly (once per second).Error codeㄩ02. After 30s inverter shuts down automatically. |
When battery voltage >=31Vdc, output cuts off, and buzzer beeps rapidly (once per second), Error codeㄩ02. After v30s inverter shuts down automatically. |
||||||
Battery High Voltage Recovery |
When battery voltage <=15VDC |
When battery voltage <=30VDC |
||||||
OUTPUT PROTECTIONS | ||||||||
Overload Proteciton |
Boost mode: when load >=110%, inverter enters into boost mode, it will decreases the output voltage. With the increase of load, if the outpu voltage is less than 160V for 10s, output cuts off, buzzer beeps rapidly (once per second). Error code: 05. After 30s inverter shuts down automatically. |
|||||||
Normal mode: when load >=110%, inverter enters into boost mode, it will decreases the output voltage. With the increase of load, if the output voltage is less than 175V for 10s, output cuts off, buzzer beeps rapidly (once per second). Error code: 05. After 30s inverter shuts down automatically. |
||||||||
Overload Recovery | Removes unnecessary loads, manually restarts inverter( pressing ON/OFF button) | |||||||
Short Circuit Protection |
Outputs cuts off, buzzer beeps rapidly (once per second). Error codeㄩ03. After 30s inverter shuts down automatically. |
|||||||
Short Circuit Recovery |
Removes short circuit, manually restarts inverter( pressing ON/OFF button) |
|||||||
Over Temperature Alarm |
When temperature of key components over normal range, buzzer beeps rapidly (once per second). Error code: 07 |
|||||||
Over Temperature Alarm Recovery |
When temperature of key components backs to normal range. | |||||||
Over Temperature Protection |
Output cuts off, buzzer beeps slowly (once per 2 seconds). Error code: 04 |
|||||||
Over Temperature Recovery |
Automatically restores output when temperature reaches to normal range |
|||||||
OTHERS | ||||||||
Output Sockets |
1 x socket |
1 x sockett + 1 x 3pin terminal |
1 x socket |
1 x sockett + 1 x 3pin terminal |
||||
Fan |
Smart cooling fan | |||||||
USB Output | 5VDC, 2.1A | |||||||
Remote Control | Wired remote control with 6m cable | |||||||
OPERATING CONDITIONS | ||||||||
Storage Temperature |
-15∼C ~ 40∼C |
|||||||
Operating Temperature |
0∼C ~ 40∼C |
|||||||
Operating Humidity |
10%-90%, non-condensing |
|||||||
PACKING |
||||||||
Product Size (WxHxD mm) |
280.4 x 159.6 x 88.8 |
310.4 x 159.6 x 88.8 |
375 x 195.5 x 99.3 |
432.5 x 195.5 x 99.3 |
280.4 x 159.6 x 88.8 |
310.4 x 159.6 x 88.8 |
375 x 195.5 x 99.3 |
432.5 x 195.5 x 99.3 |
Product Weight (kgs) | 2.7 | 3.3 | 4.5 | 5.4 | 2.7 | 3.3 | 4.5 | 5.4 |
Inner Box Size (LxWxH mm) | 332 x 205 x 142 | 365 x 205 x 142 | 423 x 250 x 173 | 480 x 250 x 173 | 332 x 205 x 142 | 365 x 205 x 142 |
423 x 250 x 173 |
480 x 250 x 173 |
Carton Size (LxWxH mm) | 684 x 430 x 309 |
744 x 430 x 309 |
520 x 443 x 371 |
520 x 500 x 371 |
684 x 430 x 309 |
744 x 430 x 309 |
520 x 443 x 371 |
520 x 500 x 371 |
Qty / Carton (pcs) | 8 |
4 |
8 |
4 |